QEP® "T" Tile Spacers are designed for Subway, brick layout or any offset tiling patterns and perimeters. "T" Tile Spacers provide consistent space or gap between tiles when installing them on the mortar, allowing for an even finish when it’s time to grout the tiles. Positioned into the corner of each tile, these spacers ensure a completely straight, even finish. Easy to use, simply place the spacers at each corner of the tiles when laying them down, then push the tiles together until the spacer is contacting each corner. Removing them shortly after installation, they can be rinsed and used again.
Available Sizes: 10202 - 1/16" Leave-In Hard Style "T" Tile Spacers - 300pk 10203 - 1/8" Leave-In Hard Style "T" Tile Spacers - 300pk 10204 - 3/16" Leave-In Hard Style "T" Tile Spacers - 200pk
Designed for quick installation, the LASH® Tile Leveling System reduces costly call backs by ensuring that the finished floor surface is lippage-free. It is the perfect system to use with large-format rectified porcelain, thin porcelain tile, marble and stone where narrow grout joints are required. This fast, simple system is the most cost effective installation method on the market to eliminate lippage.
The LASH System provides narrow 1/16" or 1/8" grout lines. For grout joints up to 1/4", traditional spacers can be used.
The QEP Hard-Style Tile Spacers offer the choice of a traditional vertical tombstone-style or inset leave-in installation method. QEP Leave-In Spacers are constructed of hard plastic, so they will not compress when used with marble, stone and large format tile. These spacers feature a lower height profile, so they can easily be covered when grouting. When used in tombstone style, these hard tile spacers can also be easily removed and reused.
The QEP Pro Installation Pliers were designed to work with the LASH tile leveling system to level, align, space and hold. These pliers make pushing QEP Tile Leveling Wedges (part B) into QEP Tile Leveling Clips (part A) much easier than doing it by hand. Designed to comfortably apply the right amount of pressure, LASH Pro Pliers make it easy to set the wedge into the clip without overtightening. These tile leveling pliers will help you save time and install tile with consistent and professional results.
QEP Flexible Wedge Spacers for Wall Tile Spacing and Alignment are designed to ensure even grout lines between tiles during installation of porcelain, stone, marble, and ceramic tiles on vertical tile applications. Their unique wedge design allows them to be pushed in or out to adjust the position of tile up to 1/8 in., while effectively holding the tile in place. The PVC manufacture of these spacers make them strong to perform and lightweight to handle. They do not slip or slide on vertical surfaces, and will not compress. Pack includes 500 wedge spacers.
The QEP® Traditional Flexible Tile Spacers maintain consistent grout joints and align tiles when installing floor or wall tiles. These spacers are made from flexible plastic, which allows for slight compression as needed during tile installation. Reusable and compatible with various tile types, these spacers are imperative to keep on hand for professional looking results.
The Tile Leveling System was developed out of a need to diminish costly mistakes due to unleveled tiles causing lippage in high-end installations. It is the perfect system to use with tile plank and large-format rectified porcelain, marble and stone and the flat base design is ideal for wall tile installations. This time saving system adjusts the height of the tiles and evenly holds their edges throughout the curing process. It is the most cost effective installation method on the market to eliminate lippage.
The Tile Leveling System comes in 4 clip sizes, 1/32", 1/16", 1/8" and 3/16", and provides narrow grout lines for tiles up to 1/2" thick.
Available Sizes: 10571 - 5/16" Porcelain Diamond Drill Bit w/Drill Guide and Water Cooling System
QEP® Horseshoe Shim Tile Spacers are ideal for spacing and aligning marble, granite, stone, and large format tile installations. They are engineered to produce a grout joint, and to quickly and easily space, and align horizontal and vertical tile. They are injection molded for dimensional accuracy and do not compress under heavy loads, making them especially helpful in vertical installations. QEP Horseshoe Shims are easy to clean, reusable, and packaged in a convenient recyclable pail.